How to choose your ring size?

Ring Sizes

In case you are closeby, the best of course is to check out our products in our Concept Store at Schlesische Straße 25 in Berlin-Kreuzberg (between U-Bahn station Schlesisches Tor and S-Bahn station Treptower Park).

Recommendation

Please measure your ring size in the evening: With the time of the day, stress, temperature, etc. your fingers can get swollen. Fingers are often a bit more swollen in the evening, even more if you are perhaps stressed or have been doing sports.
Please note that rings with wider or higher ornaments are harder to get over the knuckle, please chose a slightly bigger size accordingly.

Check on a Ring that you Already Have

Please use a ruler and measure the inner diameter and multiply the result by 3.14159. Your result in mm gives you the ring size. 54mm e.g. is size 54 in Germany.

You may as well use a rolled piece of paper: roll it, have it in the ring, mark the length where it stops overlapping, take the paper out and measure it.
Or roll the paper around your finger...

Of course, you may as well check our correspondence table below.

Measure your Finger

Just measure your finger circumference with a tailor meter or a thread: have it tight around your finger exactly where the ring should be. Please consider that it should still be wide enough to have the knuckle passing through: you need to be able to put the ring on and take it off.
Then read the value on the meter or knot the thread.
In case you use the thread technique, please cut the thread and measure it. 54mm is size 54 in Germany. Please check out our correspondence table.

 

Inner Diameter
(mm)
Ring Size
In Germany
(Perimeter mm)
Ring Size
USA/Canada
Ring Size
UK
French
Ring Size
Japanese Ring Size
12,7 40 1.4 (1) C 0,0 0,2
13 41 1.8 (1-) C 1/2 1,0 1,1
13,4 42 2.2 (2) D 1/2 2,0 2,1
13,7 43 2.6 (2-) E 1/2 3,0 3,1
14,0 44 3.0 (2-) F 4,0 4,0
14,3 45 3.4 (3) G 5,0 5,0
14,6 46 3.7 (3-) G 1/2 6,0 5,9
15,0 47 4.1 (4) H 1/2 7,0 6,9
15,3 48 4.5 (4-) I 1/2 8,0 7,8
15,6 49 4.9 (4-) J 9,0 8,8
15,9 50 5.3 (5) K 10 9,7
16,2 51 5.7 (5-) K 1/2 11 10,7
16,6 52 6.1 (6) L 1/2 12 11,6
16,9 53 6.4 (6) M 1/2 13 12,6
17,2 54 6.8 (6-) N 14 13,6
17,5 55 7.2 (7) O 15 14,5
17,8 56 7.6 (7-) P 16 15,5
18,1 57 8.0 (7-) P 1/2 17 16,4
18,5 58 8.4 (8) Q 1/2 18 17,4
18,8 59 8.7 (8-) R 19 18,3
19,1 60 9.1 (9) S 20 19,3
19,4 61 9.5 (9-) T 21 20,2
19,7 62 9.9 (9-) T 1/2 22 21,2
20,1 63 10.3 (10) U 1/2 23 22,2
20,4 64 10.7 (10-) V 24 23,1
20,7 65 11.0 (11) W 25 24,1
21,0 66 11.4 (11) X 26 25,0
21,3 67 11.8 (11-) X 1/2 27 26,0
21,6 68 12.2 (12) Y 1/2 28 26,9
22,0 69 12.6 (12-) Z 1/2 29 27,9
22,3 70 13.0 (12-) Z +1 30 28,8